Data Collection(Redirected from Firefox/Data Collection)
At Mozilla, like at many other organizations, we rely on data to make product decisions. But here, unlike many other organizations, we balance our goal of collecting useful, high-quality data with our goal to give users meaningful choice and control over their own data. The Mozilla data collection program was created to ensure we achieve both goals whenever we make a change to how we collect data in our products.
In November 2017, we revised the program to make our policies clearer and easier to understand and our processes simpler and easier to follow. These changes are designed to reflect our commitment to data collection grounded in:
- Necessity - We collect only as much data as is necessary when we can demonstrate a clear business case for that data
- Privacy - We give users meaningful choices and control over their own data
- Transparency - We make our decisions about data collection public and accessible
- Accountability - We assign accountability for the design, approval, and implementation of data collection
Owner: Nneka Soyinka
- Kenny Long
- Megan McCorquodale
- Jared Hirsch
- Daniela Arcese
- Alex Davis
- Andreas Wagner
- Travis Long
- Will Kahn-Greene
- Roger Yang
- Elise Richards
- Charlie Humphreys
- Cameron Boozarjomehri
Data stewards come from a variety of teams within Mozilla, including data science, Firefox engineering, mobile products, Pocket, Common Voice, AMO, and Thunderbird. You are welcome to tag any steward for any collection request, without respect to the nature of your collection.
Contact Us on Matrix https://chat.mozilla.org/#/room/#data-stewards:mozilla.org
Note: The data stewards aren't responsible for showing teams how to collect data, although they might be able to provide some guidance if they have time. But the Firefox data engineering team has prepared data documentation which can help!
Most assets involved in data review can be found in this repository. References to who fills out a form when are covered in the documentation below.
These guidelines are required for data collection in products with an active user base and established privacy policies under the Firefox organization, but may be applied to any Mozilla product as needed. Changes to policies themselves or the creation of a policy for a new product is out of scope of what is described here.
Key Roles for Data Collection
While the number of people involved in data collection can vary by product or project, there are two roles necessary for any project:
- Data requester - the person requesting data to be collected
- Data steward - the person who ensures the data collection process is followed and that requested data complies with Mozilla policies
In some cases a data steward may escalate concerns to the Trust and Legal teams. They are the teams responsible for defining Firefox data collection policies and can field questions about internal policy and laws governing user privacy
Mozilla always strives to make data reviews public. However, there are sometimes limited sets of circumstances when we may conduct our reviews in a private bug; for example, a service is part of an agreement where the partnership is not yet public. These reviews will be made public once the actual data collection begins.
Requesting Data Collection
Step 1: Submit Request
To request a review for new or changed Data Collection in a Mozilla product, Data Review requesters are required to provide the following:
- A completed Request Form, documenting what data is to be collected, why Mozilla needs to collect this data, how much data will be collected, and for how long it will be collected:
- Take this request and fill it out completely.
- (If you are renewing a previously-reviewed data collection, you may use this shorter form instead.)
- If your collection is Glean you can use glean_parser to generate a partially-filled template for you.
- Take this request and fill it out completely.
- A bug to attach the completed Request Form to:
- If you already have a bug filed to add the collection code, attach the form to that one.
- If you don't already have a bug, file a new one in your own component, or Firefox::Untriaged if you don't have a component (e.g. if your code's in GitHub).
- Tell Bugzilla that your form's extension is .txt so it can render it inline and so your Data Steward can review it more easily.
- A notification so the Data Steward knows it's time to review your Request Form:
- Flag the attached, completed Request Form for data-review by setting the data-review flag to ? and choosing your chosen Data Steward in the "Requestee" field that appears.
- If a Data Steward doesn't get to your review within a couple of days, please reach out to us on Element.
Step 2: Request is reviewed
Data stewards review each request to ensure that it is documented fully and to assign the data collection to one of our 4 privacy categories as described here. tiers. The detailed steps in this process are:
- Data stewards receive a data-review? on a file in a bug
- Data stewards complete the data review form based on the information provided in the data collection request. They ensure that the request:
- Follows Lean Data Practices & Guidelines
- The basic mechanics of what is being measured is documented publicly.
- Our need and justification for the data collection is documented for the record; e.g. there are complete and appropriate answers to questions on the request form.
- The request aligns with user consent and control mechanisms outlined in the data collection categories listed below
Data stewards document the outcome of their review in the bug with a data-review+ or data-review- and their completed form. Typical outcomes include:
- Unapproved requests are returned to data requesters for changes or clarification.
- Simple requests that fall within Category 1 or 2 are often approved quickly.
- Complex requests that pose broader policy and legal implications may be escalated to the Trust and Legal teams. (See Step 3)
Step 3: Sensitive Data Collection Review Process
Determine if you need to follow this process
For any data collection that is classified as category 3 or 4 (described below) – including in pre-release channels and experiments – we require additional review to be performed and an announcement to a mailing list. The reason for this is that while our privacy policies describe what we can do without additional user notice, this is an upper bound; even for collection which fits within the policy, we need to determine whether that collection is appropriate and conforms to our overall commitment to privacy and minimization.
Create documentation and request review
As a first step, it is important that the details of the implementation, intended use, and value to users be clearly documented for future reference and efficient review. As soon as this is ready (we recommend as early as possible, before you move forward with the implementation), send an email to the [email protected] mailing list.
The initial documentation from engineering/data stewardship and privacy/technical review should be completed as a prerequisite ahead of legal and security.
|Privacy/Technical Review||Office of the Firefox CTO||Kate Hudson|
|Legal/Trust Review||Legal||Nneka Soyinka|
|Security Review||Office of the CSO||Marc Perreault|
|Data Review||Data||Mark Reid|
Facilitators (named above) are expected to express judgement about how much risk is involved and will involve the appropriate reviewers.
If the level of risk is determined to be low enough and/or there is clear precedent, further discussion may not be necessary and each reviewer may give a sign-off immediately; otherwise, mitigations should be incorporated and documentation updated once they have been addressed. Live discussion is often very helpful – and should be planned for – when there is significant risk involved.
Data collection may not be shipped to users until final sign-offs have been obtained.
In the case of a dispute about sensitive data collection and/or which mitigations are appropriate, the proposer or any reviewer should work with one of the facilitators to escalate the decision to the VP/XLT member in charge of the product (e.g., Head of Firefox, Head of Pocket). Depending on the scope and nature of the risk, there may also be cases where escalation goes beyond the immediate product owner (i.e., to the CPO or CEO). When this happens, the facilitator and escalating party:
- Give each party a chance to document their recommended approach in writing.
- Share the document with all involved parties for asynchronous review/comment.
- Schedule a meeting for discussion if necessary.
- Record the final decision by the product owner.
Data Collection Categories
There are four "categories" of data collection that apply to Firefox:
- Category 1 “Technical data”
- This includes information about the machine or software application itself in which there is no or little risk of personal identification.
- Examples include OS, crashes and errors, outcome of automated processes like updates, activation, version #s, etc. This also includes aggregated compatibility information about features and API usage by websites, addons, and other 3rd-party software that interact with the application during usage.
- It also includes information about the user's settings that is necessary to provide functionality. For example, what applications users have connected to a service or what services users have logged into using a Firefox Account.
- Category 2 “Interaction data”
- This includes information about the user’s direct engagement with the service in which there is no or little risk of personal identification.
- Examples include how many devices a user has synced, engagement with specific features like clicks, scroll position, audio and session length, status of user preferences, and account activity levels.
- It also includes information about the user's in-product journeys and product choices helpful to understand engagement (attitudes). For example, selections of add-ons or tiles to determine potential interest categories etc.
- Category 3 “Stored Content & Communications”
- This includes information about what people store, sync, communicate or connect to where the information is generally considered to be more sensitive and personal in nature.
- Examples include users' saved URLs or URL history, specific web browsing history, general information about their web browsing history (such as TLDs or categories of webpages visited over time) and potentially certain types of interaction data about specific web pages or stories visited (such as highlighted portions of a story).
- It also includes information such as content saved by users to an individual account like saved URLs, tags, notes, passwords and files as well as communications that users have with one another through a Mozilla service.
- Category 4 “Highly sensitive or clearly identifiable personal data”
- Information that directly identifies a person, or if combined with other data could identify a person. This data may be embedded within specific website content, such as memory contents, dumps, captures of screen data, or DOM data.
- Examples include account registration data like name, password, and email address associated with an account, payment data in connection with subscriptions or donations, contact information such as phone numbers or mailing addresses, email addresses associated with surveys, promotions and customer support contacts.
- It also includes any data from different categories that, when combined, can identify a person, device, household or account. For example: Category 1 log data combined with Category 3 saved URLs.
- Additional examples are: voice audio commands (including a voice audio file), speech-to-text or text-to-speech (including transcripts), biometric data, demographic information, and precise location data associated with a persistent identifier, individual or small population cohorts. This is location inferred or determined from mechanisms other than IP such as wi-fi access points, Bluetooth beacons, cell phone towers or provided directly to us, such as in a survey or a profile.
Eligibility for Default on Data Collection
At installation, Mozilla’s products and services include one or more preferences and settings. These preferences and settings typically belong to a data collection state: a status that describes whether data collection occurs by default or not.
|State||What it Means|
|Default ON|| Data may be collected automatically.
Users must have a way to turn off data collection. Learn how to opt out of data collection in Firefox.
|Default OFF|| Data may be collected, but only if a user takes an clear, express action to opt-in to the collection. This can be through a configuration option, a prompt or an update through an account profile.
Users must have a way to turn off data collection.
“Release” means products that are not experimental. These include Firefox, Pocket, Lockwise, Monitor, and others.
“Pre-release” means experimental products. They are typically identified by the words “Beta,” “Nightly,” “Preview,” “Reference Browser,” or “Developer Edition” in the name of the product.
|Category 1 “Technical data”|
|Release & Pre-Release - eligible for Default ON.|
|Category 2 “Interaction data”|
|Release & Pre-Release - eligible for Default ON.|
|Category 3 “Stored Content and Communications”|
| Release: Default OFF. Default ON requires prior Trust approval.
Pre-Release: Default ON eligible
On a case-by-case basis collections may be eligible to be "Default ON" if mitigations are identified. Mitigations may include UX changes that make users aware of additional risk, technical mechanisms that remove the risk, or a risk assessment done of a case-by-case basis that determines the risk is limited.
|Category 4 “Highly Sensitive or Clearly identifiable personal data”|
| Release & Pre-Release: Default OFF
Any collection requires prior Trust approval and (i) advance user notice (ii) consent and (iii) an opt-out.
Every year, the data collection owner and peers will survey all of the existing data collection systems for their product or project. This survey has the following goals:
- To ensure that it is still necessary and useful to collect a piece of data.
- To re-identify who is responsible for the collection, monitoring, and reporting of collected data.